SPARES

Glass Washing Machinery - Spares

Acedet

Washing machine additive, cleans tanks and prevents 'scum ring' specially formulated to aid in the cleaning of specialist coated glass, such as Pilkington ‘K’ and soft coats

Ref: GLAS24

Price: £12.30 1 litre £61.50 5 litre

Hytrex Filter

Standard water filter cartridge

Ref: P0032

Price: £6.59 each £5.00 each (box of 25)

Filter Housing

Housing for the standard Hytex filter

Ref: P0031

Price: £75.20 each

Brass Water Filter

Standard brass water filter

Ref: P0019

Price: £26.84 each

Air Filter

Dual density foam to ensure, clean air is used for the drying process.

Ref: W2123

Price: £20.75 each

Demin Resin

Thermax Tulsion MB115 Mixed Bed Resin Demineralising resin for use in Demin vessels

Ref: P0203

Price: £75.93 per 25ltr bag

Demin Vessell

Available in two sizes and complete with manifold assembly.

Ref: Large P0060 / Small P0022

Price: Large £285.00 Small £235.00

Drive Tyres

Available in linished for the wet area and Un-linished for the dry area.

Ref: W2111

Price: £10.65 each

Drive tyres with holes

Available in linished for the wet area and Un-linished for the dry area. To aid the processing of thicker plates

Ref: W2531

Price: £13.00 each

Blue Poly Tyres

Can be used to replace the rubber drive tyres on the last two rollers, to help prevent marking of Glass.

Ref: W2417

Price: £10.65 each

CM8 Support wheels

Available as a complete unit or can be purchased Separately as just a tyre.

Ref: Complete W2102 Tyre only W2103

Price: £11.25 Complete £3.60 Tyre only

LP20 Pillow Block Assembly

Available as a complete unit or can be purchased separately as just a bearing, also available with two different size fixing holes, 10mm & 13mm.

Ref: Complete W2100 Bearing only W2192

Price: £22.75 Complete £16.26 Bearing only

Stainless Locking Collars

Stainless steel collar to prevent the bearing moving on the shaft. *Single grub screw

Ref: W2511

Price: £4.00

Stainless Locking Collars

Stainless steel collar to prevent the bearing moving on the shaft. *Double grub screw

Ref: Ref:

Price: £7.20

Top Flanged Bearings

Green bearing used for the top of the brush shafts.

Ref: Complete W2170 Bearing only W2438

Price: £44.50 complete £30.23 bearing only

Ebara Pump

For Pre-Wash (6 brush) Main Wash Pump Rinse Pump.

Ref: P0099

Price: £274.26

Foras Pump

Recirculation pump.

Ref: P0201

Price: £254.40

Pump Conversion Kit

To aid fitting of a Foras pump when replacing the old type recirculation pump

Ref: Ref:

Price: Price:

Bevel Gears

Bevel gears for use on the brush lay shaft 20mm bore and the upright 15mm bore.

Ref: 15mm Bore W2131 20mm Bore W2132

Price: £21.64 each

Spur Gear 30 Teeth

For use on the bottom of all brush shafts and drive shafts.

Ref: W2134

Price: £18.00 each

Rubber Strips

Long vertical rubber strips located at the entrance and the exit of the washer. Pre drilled to order, please give sizes with order

Ref: Input W2198 Output W2199

Price: £14.50 pair

Silicone Strips

Long vertical silicone strips located at the entrance and the exit of the washer. Pre drilled to order, please give sizes with order. For use on Softcoat machines.

Ref: W2530

Price: £35.00 pair

Input/Output Wheel

Black urethane rack wheels.

Ref: W2026

Price: £13.76 each

Conveyorised Output Wheel

The same as a standard output wheel but with an extra flange to prevent glass falling off the racks on the conveyorised model.

Ref: W2404

Price: £14.89 each

Immersion Heater with thermostat

3kw 11" 3kw 14"

Ref: W2598.1 / W2598

Price: £23.50 £28.50

7" Thermostat

Set your water to the optimum temperature for the best cleaning performance.

Ref: W2599

Price: £11.70

Float Switch

Low level water sensor, to prevent exposing the heating elements and causing a burn out.

Ref: Ref:

Price: Price:

Door & Tank Switches

Ref: Ref:

Price: Price:

Rotary Brushes (Standard)

Our standard 0.3mm bristle rotary brushes. Nylon bristle wound on to a stainless steel shaft. Available from 1.3m - 3.0m

Ref: Ref:

Price: Price:

Rotary Brushes (Ultra Fine)

Our optional 0.15mm bristle rotary brushes, for use with more sensitive coated glass and pre tempering. Nylon bristle wound on to a stainless steel shaft. Available from 1.3m - 3.0m

Ref: Ref:

Price: Price: